Recent content by Annap_mike

Not sure what I did. But it appears at least for now problem is solved. What I did do- the water flow was very very low. I decided to turn off the main valve, leave 2 faucets open and open the 2 cleanouts installed at 2 different points on the piping. one cleanout is under the steps just past...

I have backwashed the filter several times and by passed and still poor water flow.. I am about ready to move- if only I could.

More pictures

Here are pictures of the setup inas much details as I could give. Help!

If one of my two free standing whole house filters is clogged? how can I tell? and how Can I Solve?

I have had several different water anaylsis done. That is why there is both an iron and a sediment filter. Both tested quite high. Untreated water is very red. The cartridge filter would clog quite quickly.But when I added the whole house filters he removed the cartridge filter.( When it was...

No I haven't done that. I have manually regenerated or backwashed them both just to make sure they were working properly but have not bypassed one or the other.

They are whole house filters. The cartridge type was becoming clogged once or twice a week. The whole house system are two large blue free standing filters. one for iron and the other for sediment. Installed in March 2008.

Thanks for the input. My best guess is that the water is probably being treated correctly. But where the water enters the house to the tank is not where the iron and sediment filters are. The tank is under the steps in a crawl space, therefore the clog or buildup in my best guess is from the...

We have lived in this house since 2001. The well water has easily been the biggest cause of headaches and frustration... not to mention money spent. New pump, tanks, filters, whole house iron and sediement filters, cleaning out the pipes from the pump to the whole house filter. But regardless...

The pressure is now about 36-50 -I preferred the higher settings but his reasoning was it will save a bit of water at the lower settings. It seems multiple showers/baths in a row are what cause the the pressure to drop to zero. My wife did 2 loads of laundry to day and all was fine but the...

It is a brand new pump just installed this week. Not sure I really needed the new pump since one of the other problems turned out to be an exposed wire touching the ground wire at the well head. see my original post. It is Myers 4" submerisible pump. Ok- new settings tanks around 30psi...

if the tanks pressure are already below the cut-on point then what is causing this pressure drop to zero and having to re- set the pressure via the lever on the low-pressure switch. We are putting back on a normal pressure switch shortly. but if that solves it why would the pressure be...

I have been asking questions under the possibility that I would need to remove air from one or both tanks to get thepressure in the tanks to fall below the pump cut- on point of 45psi. What if the pressure in the tanks is such that one or both are 10psi or more below the pump- cut -in...

Thanks will do so this evening after work, and baseball practice etc....