I hope someone can help solve what I hope is not a major issue. I am on a septic well and my water is treated through a Culligan system which consists of a rustmaster tank, water conditioner tank, oxygenizer tank and salt container.
The water pressure has always been low, we had culligan serviceman in and he replaced rustmate tank. We had a plumber in he repalced pressure gage now producing 60-80 lbs pressure. Neither of these have improved our water pressure. Plumber says water is having to go through too many tanks thus losing pressure, Culligan says there is blockage between water tank and their system.
I have an outside tap that bypasses Culligan system and water comes out full force.
We are not able to turn on second tap in house without significant loss of water flow. In fact second floor has no water if tap running down stairs. Water flow is not bad from when one tap in use however for some strange reason water flow is minimal when utilizing washing machine.
Thanks for your thoughts.
The water pressure has always been low, we had culligan serviceman in and he replaced rustmate tank. We had a plumber in he repalced pressure gage now producing 60-80 lbs pressure. Neither of these have improved our water pressure. Plumber says water is having to go through too many tanks thus losing pressure, Culligan says there is blockage between water tank and their system.
I have an outside tap that bypasses Culligan system and water comes out full force.
We are not able to turn on second tap in house without significant loss of water flow. In fact second floor has no water if tap running down stairs. Water flow is not bad from when one tap in use however for some strange reason water flow is minimal when utilizing washing machine.
Thanks for your thoughts.