RAM1961
New Member
Does anybody know anything about these? We have the two tank model # s07FS32SR and best I can tell, there are two lines to the 2092 "DR" control valve. Bought this place in September, and it seemed to be working fine at the time. But we've filled up the tank with salt and it hasn't gone down or anything - and that's been four months or better. Sometimes when we turn the indexing knob on control valve from "in service" to "regenerate", you can hear water running thru one or both of those lines, sometimes you don't. Regardless, the iron smell is very obvious. I know nothing about these and operation manual isn't seeming to give me any hints. Half tempted to replace it, but know nothing about where these two lines go from/to the control valve - one does go to a HP 360 water filter, but then into the wall and who knows where. We're empty nesters, so don't use a lot of water, but I know this isn't good for the system, water heaters, clothes, etc. Even the water in toilet bowl has a slight color to it. Any ideas? Thanks in advance. Rick