snortindog
New Member
Hoping to get some advice on my new Fleck 7000SXT softener.
I have a 12 x 48 tank. Softener has been in service for 4 weeks.
Everything works fine except in the 12 min. brine fill, it only adds 1.5 gallons. Brine draw works okay-6 gallon in 25 min. There is also a lot of bubbles in the line when filling. It has (what I think is) a .5 gpm BLFC, the hole measures .030 ". The numbers on it (34 123 F) do not match anything in the parts book. Furthermore, I removed it and got only 3 gallons in the 12 min fill time.
I could increase fill time, but worry it will start filling at .5 gpm and add way too much water.
Water pressure at Softener is 35-45 psi.
thanks for the help!
I have a 12 x 48 tank. Softener has been in service for 4 weeks.
Everything works fine except in the 12 min. brine fill, it only adds 1.5 gallons. Brine draw works okay-6 gallon in 25 min. There is also a lot of bubbles in the line when filling. It has (what I think is) a .5 gpm BLFC, the hole measures .030 ". The numbers on it (34 123 F) do not match anything in the parts book. Furthermore, I removed it and got only 3 gallons in the 12 min fill time.
I could increase fill time, but worry it will start filling at .5 gpm and add way too much water.
Water pressure at Softener is 35-45 psi.
thanks for the help!