No Hot Water

Discussion in 'Shower & Bathtub Forum & Blog' started by khiraoka, Jul 29, 2008.

  1. khiraoka

    khiraoka New Member

    Messages:
    1
    I have a single handle Moen shower. When the handle is turned to cold the water flows fine. When the handle is rotated counter clockwise to hot, the water stops flowing. What could be the problem and hpw can it be fixed? The only access is through the hole where the faucet/handle is at.
  2. jimbo

    jimbo Plumber

    Messages:
    8,997
    Location:
    San Diego
    Assuming you have the PosiTemp type ( you don't pull to turn on) it sounds like the balance spool is stuck. Get a new Moen 1222 cartridge.
  3. Redwood

    Redwood Master Plumber

    Messages:
    7,450
    Location:
    Connecticut
    How does it turn on?
    Do you turn it?
    Or,
    Pull it out?
Similar Threads: Water
Forum Title Date
Shower & Bathtub Forum & Blog Thinset (thin-set) : Changing Water Ratio's that are spec'd by manufacture Sunday at 8:18 AM
Shower & Bathtub Forum & Blog Maximum time after waterproofing application Saturday at 8:34 AM
Shower & Bathtub Forum & Blog How to test if your waterproofing material has frozen Friday at 1:26 PM
Shower & Bathtub Forum & Blog Shipping Shower Waterproofing in cold weather: How to protect from freezing Friday at 1:20 PM
Shower & Bathtub Forum & Blog Wood Sleepers over Torch-Down Primary Roofing Waterproofing: Exterior Deck over Living Space Oct 15, 2014

Share This Page