hayley3
Member
- Messages
- 50
- Reaction score
- 1
- Points
- 8
So I didn't have a 5/8 inch drill bit so I bought this one:
http://www.sears.com/dewalt-dw5241-5-8-inch-x-6-inch/p-SPM10763250719?redirectType=SRDT
And that didn't work so I used a 5/8 inch spade bit. However now, the hole is not big enough for the toggle itself. I tried hammering the bolt in hoping it would push in but it won't go in because the hole is a hair too small for the toggle.
Please I need suggestions! The drill bit now fits easily inside the hole. The toggles do not.
Cheryl
http://www.sears.com/dewalt-dw5241-5-8-inch-x-6-inch/p-SPM10763250719?redirectType=SRDT
And that didn't work so I used a 5/8 inch spade bit. However now, the hole is not big enough for the toggle itself. I tried hammering the bolt in hoping it would push in but it won't go in because the hole is a hair too small for the toggle.
Please I need suggestions! The drill bit now fits easily inside the hole. The toggles do not.
Cheryl
Last edited by a moderator: