Flapper leaking on AS Lexington 1-piece

Discussion in 'Toilet Forum discussions' started by nothingeverworks, Oct 30, 2010.

  1. nothingeverworks

    nothingeverworks New Member

    Messages:
    38
    Location:
    Florida
    The flapper is worn and needs o be replaced. Can I just replace the black rubber or does the whole flapper kit need to be replaced?
  2. shacko

    shacko Master Plumber-Gas Fitter

    Messages:
    561
    Location:
    Rosedale, Md
    You should be able to replace disc only. You don't have a habit of using the handy cleaners that drop into the tank, do you?, some of them will deteriorate the mechanism
  3. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,811
    Location:
    Cave Creek, Arizona
    You can just replace the disc, UNLESS, you break its retaining "pin" off when you remove the old disc.
  4. Jerome2877

    Jerome2877 In the Trades

    Messages:
    397
    Location:
    BC
    Be careful when removing it as HJ said if you break the pin you have to replace the whole thing. The problem is that your model takes a different size than the regular AS part. I had to have one ordered in from AS last year and it took a few weeks.
  5. nothingeverworks

    nothingeverworks New Member

    Messages:
    38
    Location:
    Florida
    yep found just the disc and that solved the problem. thanks guys
Similar Threads: Flapper leaking
Forum Title Date
Toilet Forum discussions Leaking tank/flapper valve Jun 29, 2014
Toilet Forum discussions Toto Drake and leaking Flapper - again Jun 14, 2013
Toilet Forum discussions New Toto MS854114EL installed, flapper is already leaking? Mar 26, 2011
Toilet Forum discussions Toto Guinever flapper leaking AGAIN Nov 5, 2010
Toilet Forum discussions leaking toilet after 2 flapper changes Aug 1, 2010

Share This Page