Delta rough in valve body question

[Bbillcee]

hey are there an user replaceable parts on the delta rough in valve? I had one installed 10 years ago. the tenant broke off the the little mixing lever on top of the handle. Delta sent me a new one and i was able to screw it in. I was looking at the plastic part of the shower body where that lever screws into and was wondering if any part of that plastic breaks would I then need to replace the whole body or is any of those plastic parts replaceable?

***NEVERMIND ISEE YOU CAN CHANGE THE WHOLE CARTRIDGE! THX!

 

[Tuttles Revenge]

Just to answer the question. Because I've done it. There are only 3 possible parts to the R10000-unws. If you buy the valve body with stops, there are the stops that can be replaced. And there is the mounting clip on the back which if removed (what I did) can be replaced.

I stupidly removed the mounting clip in an installation of my girlfriends tiny house not thinking that the clip also is what the trim plate mounts to. Doh.. Had to fix that at trim time! Bailing wire to the rescue!