Basement venting

Users who are viewing this thread

gplayer12

New Member
Messages
3
Reaction score
0
Points
1
Location
IL
Looking for advice on venting this basement rough in

4” for toilet
2“ vanity
1.5” shower/tub combo
The 3” into the slab is from the bathroom above. Any advice on how to vent this would be great.
There is a 2” capped from the bath above as well

IMG_3467.jpeg
 
Last edited:

Jeff H Young

In the Trades
Messages
8,962
Reaction score
2,236
Points
113
Location
92346
you can put a 2x2x1 1/2 santee on the 2 inch drill a few studs for a lav trap arm and Im hopefull the 2 inch with cap above is to tie the vent in . You didnt mention but that would be way to do a future vent
 

gplayer12

New Member
Messages
3
Reaction score
0
Points
1
Location
IL
Thanks for the input Jeff! I assume the capped pipe is tied to my vent stack but haven’t been able to figure that out yet.
 

Jeff H Young

In the Trades
Messages
8,962
Reaction score
2,236
Points
113
Location
92346
you probebly cant see enough to confirm it being a vent connection but it makes total sence and I dont know why else it would be there . so its a pretty safe assumption unless you can ask builder .
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks