jlohrenz
New Member
- Messages
- 45
- Reaction score
- 0
- Points
- 0
We just replaced our old cast iron tub with this. So far we are very impressed. It was easy to install.
Our only gripe was the drain, when hooked up to the overflow was about a 1/2" off. So we had to do some work with the overflow to get everything to line up correctly.
It runs quietly, and with a proper mortar bed, is a very sturdy whirlpool. We also installed it with their EZ-Heater option, which keeps the water at the same temp as when you first fill the tub. It worked like a charm.
Our only gripe was the drain, when hooked up to the overflow was about a 1/2" off. So we had to do some work with the overflow to get everything to line up correctly.
It runs quietly, and with a proper mortar bed, is a very sturdy whirlpool. We also installed it with their EZ-Heater option, which keeps the water at the same temp as when you first fill the tub. It worked like a charm.