American Standard COLONYâ„¢ FitRightâ„¢ ROUND FRONT 10" ROUGH-IN TOILET

Discussion in 'Toilet Forum discussions' started by roslyn, Dec 7, 2010.

  1. roslyn

    roslyn New Member

    Dec 7, 2010
    seattle, wa
    Last edited by a moderator: Dec 8, 2010
  2. Gary Swart

    Gary Swart In the Trades

    Sep 1, 2004
    Yakima WA
    I am not familiar with this model either, but American Standard toilets have a very high return due to manufacturing defects. If you go for any AS, take it out of the box and inspect it very carefully. Make certain it sets level and in full contact with the floor. Look for patched holes or other blemishes. This may be a builder grade which is a cheap model that builders buy to install in their spec houses so they can keep the home priced as low as possible and their profit margin up. These toilets are frequently replaced by the homeowners shortly after the sale. Most of us on this forum prefer the Toto line. Round fronts are not very popular now days, but there are some.
  3. Sponsor

    Sponsor Paid Advertisement

  4. Basement_Lurker

    Basement_Lurker One who lurks

    Jun 21, 2007
    I smash things and demand money.
    Victoria, BC
    The colony suite is American Standard's low end products so don't expect anything great. Are you sure you have a 10" rough-in?
  5. Terry

    Terry Administrator Staff Member

    Aug 17, 2004
    Bothell, Washington
    On a 12" rough-in, it would be 26.5" from the wall with about 2.5" behind the tank.
Similar Threads: American Standard
Forum Title Date
Toilet Forum discussions DXV by American Standard Jan 11, 2016
Toilet Forum discussions American standard dual flush fill water very slow Nov 15, 2015
Toilet Forum discussions American Standard Dual Flush or Toto Entrada? Nov 11, 2015
Toilet Forum discussions 1930s Top Fill American Standard Toilet Parts Needed Jul 11, 2015
Toilet Forum discussions Replacing an American Standard 30yr old toilet Apr 29, 2015

Share This Page