After Power outage, I have pressure, but no water

Discussion in 'Pumps and Tanks Well Forum & Blog' started by Smitty79, Aug 28, 2011.

  1. Smitty79

    Smitty79 New Member

    Messages:
    2
    Location:
    New Hampshire
    DSCF3816.JPG

    Like the post says, I have well water with plenty of pressure at the pressure tank. I took some water out of the tank from the spicket right there, the pump turned on and the pressure went back up. That is the only place where the water is flowing, nothing else in the house has any water except for a slow dribble from what appears to be water left in the lines before the power outtage. Any input would be greatly appreciated.
  2. Smitty79

    Smitty79 New Member

    Messages:
    2
    Location:
    New Hampshire
    I figured it out....I have a Radon water system that needed to be either bypassed or reset...
  3. Teets

    Teets CT pump guy

    Messages:
    87
    Location:
    Watertown, Connecticut
    The water pressure is way too high and should be adjusted.
Similar Threads: Power outage
Forum Title Date
Pumps and Tanks Well Forum & Blog Bad Check Valve? Pressure tank drains during power outage. Apr 18, 2014
Pumps and Tanks Well Forum & Blog Freezing temps, power outage Dec 29, 2009
Pumps and Tanks Well Forum & Blog Sand and rust after power outage Apr 21, 2008
Pumps and Tanks Well Forum & Blog UV light, well tanks and power outages Feb 11, 2008
Pumps and Tanks Well Forum & Blog Hand Pump for Power Outage? Sep 25, 2007

Share This Page