Search results

I am pulling a 1 inch line from a 2 inch galvinized casing. I pulled a couple of years ago (replaced everything new) and replaced the steel pipe with pvc pipe. I lost prime and the 1 inch pipe will not hold water so I am guessing the check valve is broke or stuck open from rust and build up...

Can I use 11/4" beveled pipe in a 2" casing. The od is 1 7/8" on the suction. Is the 1/8" clearance enough to feed water back to the ejector? Thanks

What size suction line should you use for a 2" deep jet well? Single line well.

Okay, I have a 2" well casing with a single pipe dropped 70 ish feet with ejector and foot valve. I have pulled twice due to foot valve being clogged from the rust from the steel pipe. Going back with plastic!! I dropped a string with big nut attached, hit water at approx 32 feet. I would...