Search results

Ok i have a problem and really need help. I have a Kohler Cimmaron that i have had for a year or so now. Up until a couple of weeks ago it worked fine with no problems. Now somehow water is leaving the tank and the fill valve keeps coming on to refill the tank. I shut the water supply off and...

I've had a Kohler Cimmaron for a year or so now and it has worked great until recently. Every few minutes the fill valve opens and fills the tank then somehow it must lose water because it kicks on awhile later. I have tried adusting the chain and water level and cleaning around flapper seal...

First of all Thanks to all those to have given such good advice in my past posts. At the moment I have one last home improvement project on my list. That is to put a new seal under a toilet and change fill/flush valve while I'm at it. The problem is with the water supply. When I go turn off the...

I am installing a new Kohler toilet. One of the hold down bolts on the old toilet was so rusted i had to hacksaw it off. Then when i pulled the toilet off i had alot of difficulty removing the remains of that bolt from the flange. The other bolt installed fine and held in place firmly the one i...

I'm looking to buy my first new toilet. The only requirement i have right now is it has to have a round bowl due to space. I'm not looking for the Cadillac of toilets nor do i want to buy the cheapest to save a few bucks. Any advice on brands to buy or not to buy or features to look for is...

When i opened the valve to drain my hot water heater only a very small trickle of water came out. I made sure the valve was open all the way. Is this normal? Everyone has told me about cleaning out the lime and scale build up when draining the tank. How is this accomplised with such a weak flow?

The lower water heater element is out in my water heater (Rheem brand) and i'm getting ready to change it (never done it before). Everyone tells me to change both the upper and lower at the same time .... makes sense to me. So i have the lower element but i can't find a upper elemt matching mine...

I'm looking to buy one of those multi-purpose ladders such as the Little Giant or Werner. Which is a better buy or better quality? The Little Giant is made in the USA and the Werner in China. I've heard some complaints about the Little Giant. Any advice?

I'm getting ready to change lower water heater element. Never done this before. I know basically what to do. Any words of advice or do's or don'ts i should know about?

I am changing one of the outlets in my kitchen. It is a kind i have never seen before where the wires push in from the back and are somehow locked in. Perhaps by a small metal tab on each side. Just wanted to check on proper way to remove so i don't damage anything.

I recentlty changed the faucet in my guest bathroom with no problem. When i turned on the new faucet a decent amount of water came out but only about a third of the pressure as the old one. All connections are tight and valves are wide open. Water pressure everywhere else is fine.

I'm trying to remove the shower drain as it has become corroded. I don't know the first thing about how to proceed. It is in a mobile home if that matters any.