Recent content by greenbaypackersfan

Also, many of the controller have an ON/FF rain sensor switch. Mine in particular, I can turn the sensor on or off if I desire to (in case it's a little shower and I decide to still continue with the sprinkler schedule.) I can also ajust the sensor sensitivity. Check your controller box, I...

ahhhh... okay I totally understand. I did inspect the transformer for awhile and thought perhaps one of the wires got burnt off (but that wasn't the case.) The coil did get quite hot (put my finger there and whew, got a slight burn before replacing it. thank you guys for the response.

My old doorbell button switch was defective. 3:30am in the morning it began to ring constantly as if someone had press the button and held it there. I woke up and opened the door to see no-one there. Upon some investigation, I realized the wires connecting to the button was hitting each other...

wow, been reading through most of the threads here on the Irrigation/Sprinkler System part of the forum. I would say Fireguy97 offers some good information and solid tips. I wasn't going to post this since I did not contribute anything to this thread but just want to point out, everything he...

yes thanks jadnashua Furd, thanks for the post. Yes, the #18g wire from the transformer is wire nut together with a #14g wire and the end of the #14 wire to the circuit breaker. Originally, it doesn't have it's own circuit breaker, it's put together with a 15A breaker with another 14g wire...

also I realized the buzzing is coming from the transformer.....

Can you explain why it is a fire hazard if I have 18GA wire between the circuit breaker and doorbell transformer? I'm a bit confused when right after that sentence, you tell me to "Replace the 18GA wire with standard 14 gauge wire attachd to a 15A breaker." That's exactly what the situation...

Hi All, Ok, quick question for you all and please educate me. My "GE" control panel, it's pretty up to code. The house is about 7 years old and each circuit breaker (all GE breakers) has one wire and not double tapped EXCEPT ONE. The one that is double tapped contains a 15A circuit breaker...

Just curious here and want to ask some experts here on LAWN FERTILIZERS. Last year, I used Vigoro Super Green Lawn Fertilizer and the results were fantastic. Not only it makes the lawn green, it actually made it super DARK green and can visually see the difference between neighbor's lawn and...

lol I know the "I" in the screw slot means closed. During the spring/summer season, they need to be closed, but what about the winter time when the system has been winterized? Do I keep it closed or open them?

^ No, I believe you are referring to the vavle on the pipe, I'm talking about the PVB Test Cocks. The little screws on the PVB Tests

Hi, Now that the Sprinkler System has been properly turned on, I was wondering which way should the PVB test cock needs to be facing. Mine looks almost like this one here in the link below http://www.aceflowcontrol.com/pvb01natural.jpg As you can see, the PVB Test cocks are below the...

Is it me or the guy in this video is turning the PVB test cocks incorrectly. http://www.youtube.com/watch?v=o7Nr_w-9NSA In the link provided above, you see the guy left the first PVB Test Cock #1 in the CLOSED position "I" (on the right side, water pipe coming from the basement) and he left...

ah... seems like after doing a bit of online research. I realized my PVB Test Cocks are on the CLOSED position (vertical), they say to open it before Winterizing and keeping it at 45 degree angle when winterizing complete. Now it's spring, do I keep the PVB Test cocks closed or open when the...

About an hour ago, I went with Fireguy97's Step-by-step on how to turn on the Sprinkler System and it went almost perfect! The PVB was working fine and had some water coming out initially when I turned No1 and No2 on, but soon the PVB stop having water coming out. I went through each zone at 3...