Tub waste/ Fine thread shoe

Discussion in 'Shower & Bathtub Forum & Blog' started by kenplumb, Apr 18, 2007.

  1. kenplumb

    kenplumb New Member

    Messages:
    1
    :confused: Hello
    Just finished a 6 Bathroom hs with everything in a chrome finish.
    New owner wants everything in satin nickel.
    The only thing I am having problems with.
    One of the 2nd floor tub waste is central brass that has a 1 1/2" fine thread
    shoe. Almost every tub waste I have used has 1 1/2" standard thread.
    All the touch toe pop-up come with a 1 1/4" fine thead to 1 1/2" standard threaded bushing.
    Does anybody know where I can get an 1 1/2" x 1 1/4" fine thread bushing
    or any other Idea's
    Not able to remove tub waste
    Any input would be helpful
    Ken
  2. Fine threads on BOTH sides?

    i have found 1-1/4" Fine Thread X 1-1/2" Coarse Thread Brass Bushings.
    Not with fine threads on both sides though.

    David
Similar Threads: waste/ Fine
Forum Title Date
Shower & Bathtub Forum & Blog Stumped - How to Replace Tub Waste/Overflow w/ Very Tight Clearance to I-Joist Jul 5, 2012
Shower & Bathtub Forum & Blog Brass waste/overflow: Recommendations?? Feb 9, 2012
Shower & Bathtub Forum & Blog What is the best kind of bathtub waste/overflow drain? So confused!!! Nov 8, 2010
Shower & Bathtub Forum & Blog Tub drain/waste/overflow escutcheon placement with respect to finished floor Apr 9, 2009
Shower & Bathtub Forum & Blog Tub waste/overflow question.... Apr 7, 2009

Share This Page