Verdeboy
In the Trades
- Messages
- 2,041
- Reaction score
- 6
- Points
- 0
I'm working on a ceiling fan with light. The light works, but the fan doesn't. I removed the fan pull chain switch and disconnected all the wires. I used my volt meter, and there is definitely power going to the switch.
There are 4 wires: black, brown, white, and green that were connected to the switch. Which 2 wires do I touch together in order to bypass the switch? And if the fan still doesn't work, do I just assume that the fan motor is shot or is there another way to test the fan motor?
There are 4 wires: black, brown, white, and green that were connected to the switch. Which 2 wires do I touch together in order to bypass the switch? And if the fan still doesn't work, do I just assume that the fan motor is shot or is there another way to test the fan motor?