Toto Wahlet E200 water connection thread adapter

Discussion in 'Toilet Forum discussions' started by Lindsay, Aug 17, 2011.

  1. Lindsay

    Lindsay New Member

    Messages:
    1
    Location:
    australia
    I'm installing a Toto washlet and have all the interfaces matched except the water connection. Toto advise that the connection thread is a 7/8" toilet thread. I need to adapt this to a bsp thread. I've learned that this Toto thread is not a NPT thread. Can anyone advise where I can find a thread adapter to connect a Toto washlet thread to a BSP thread (ideally half inch)
    Cheers
    Lindsay
Similar Threads: Toto Wahlet
Forum Title Date
Toilet Forum discussions one piece vs two piece Toto Saturday at 10:24 PM
Toilet Forum discussions Broke off a flush valve hook - Toto Vespin Aug 20, 2014
Toilet Forum discussions Toto toilet spurts water 7-11 times from water pipe after flushing Aug 16, 2014
Toilet Forum discussions Toto flush lever getting stuck. Aug 12, 2014
Toilet Forum discussions Fitting Toto to 13 7/16 rough-in to wall, but less with baseboard and shoe molding Jul 30, 2014

Share This Page