DaHu
New Member
So its an easy job. However. My building has super thick pipes coming out of the wall that have a normal size end. The universal shower heads screw on but they usually require you to move a piece up the pipe to tighten it down. Those pieces are too small to move up the pipe. So water sprays everywhere. Not sure why the built it like this, but is there any way around it? Need a shower head with a hose for washing the dog!
So long store short. threads are normal universal size, but the pipe turns to be about 1/2 inch bigger right where the threads are.
Any advice?
PS I cant even find pictures online but I found one that sorta explains what I mean.
http://www.houzz.com/photos/1306229...ead-4-Inch-in-Oil-Rub-modern-showerhead-parts
Cheers
So long store short. threads are normal universal size, but the pipe turns to be about 1/2 inch bigger right where the threads are.
Any advice?
PS I cant even find pictures online but I found one that sorta explains what I mean.
http://www.houzz.com/photos/1306229...ead-4-Inch-in-Oil-Rub-modern-showerhead-parts
Cheers