Hiskid1973
New Member
I switched to propane and installed a Nordyne M7 last year in my 14x70 m/h last year. This past summer I enclosed the 9x20 porch. We enjoyed the extra space so we decided to put a small pellet stove in. We are amazed how much residual heat there is to warm the rest of the m/h with fans. Anyway my thought was to send it back the hall and circulate using he ventilation option with the th8321 stat. The a/c is a package unit so I have y connected to y&g and let the fan board in the package control it. I have the stat g going to the m7 board. I switched to "fan" but no response with m7 fan. I had the stat set to "furnace controls fan". I didn't try stat controls fan". I'm wondering about the nordyne board as it has r,c,b,w on one terminal block and the y and g on the block below. It made me wonder if the fan control is only on the a/c side. My thought was a second stat using he fan setting using ventilation options. My concern tho is that if the furnace does fire there would be a conflict.
Any thoughts/comments. GBY
Any thoughts/comments. GBY