Hello. My father recommended me to this forum. We actually recently installed a set of GE SmartWater filters on my house, like he did, from a suggestion on this forum (he loves his!). They work great, accept that I have a very small leak on all 4 of the fittings that screw into the filters. It's a small drip, small enough that you have to watch it for quite a while to see one move, but large enough that I put a towel on the ground and it's wet in a matter of days. I'm afraid I either used the wrong sealer (teflon tape) or screwed them in too tight. Can someone possible tell me what I might have done wrong and the best way to solve this? I was going to simply turn off the water while we were gone this weekend and put some silicone around them to dry, but if there's a proper way to fix it please let me know. Thanks! Here are pictures if they can help:
http://www.kraskofamily.com/uploads/122808-02.jpg
http://www.kraskofamily.com/uploads/122808-03.jpg
http://www.kraskofamily.com/uploads/122808-02.jpg
http://www.kraskofamily.com/uploads/122808-03.jpg