CTM
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I have just replaced the cartridge for my shower with original mixet parts (I sucessfully replaced this part before in the same bathroom as well as the other bathroom in the same house a few years ago). The problem now is that the water will not shut off completely and tightening the outer sleeve only serves to make the hot/cold adjustment lever unmoveable. The water still continues to trickle from the spout. Since I have replaced this part before without a problem I am at a loss as to why the water continues to run. I replaced this cartridge because the water began dripping and continued to worsen so naturally I believed the cartidge was the problem. Any help here would be greatly appreciated.
Could the plumbing just need to be re-done the house was built in 1974.
Could the plumbing just need to be re-done the house was built in 1974.
Last edited: