Lesschamps
New Member
Hi all,
I have a Nevian NPE-240A NG with a recirculating line. We recently had a freeze and despite turning my water off and draining my pipes and water heater the plastic part of the pump housing cracked in the water heater. I replaced the pump and everything is working well except my water pressure is very low. The cold water in my hoses is still strong but anything that runs through the hot water heater has low pressure, all showers, and sinks throughout the house. I just replaced the water sensor on the off chance that was causing the problem but no change.
Are there any other sensors or parts I should be looking at in the hot water heater?
We have pex lines inside the house so they didn’t freeze. I don’t think there is a leak as our water bill has not increased.
Any help figuring out what to do next would be greatly appreciated.
I have a Nevian NPE-240A NG with a recirculating line. We recently had a freeze and despite turning my water off and draining my pipes and water heater the plastic part of the pump housing cracked in the water heater. I replaced the pump and everything is working well except my water pressure is very low. The cold water in my hoses is still strong but anything that runs through the hot water heater has low pressure, all showers, and sinks throughout the house. I just replaced the water sensor on the off chance that was causing the problem but no change.
Are there any other sensors or parts I should be looking at in the hot water heater?
We have pex lines inside the house so they didn’t freeze. I don’t think there is a leak as our water bill has not increased.
Any help figuring out what to do next would be greatly appreciated.