Lennox 023 oil furnace install questions?

Users who are viewing this thread

thunderhead

Member
Messages
38
Reaction score
3
Points
8
Location
Illinois
I just picked up a Lennox 023 oil furnace for my garage. It has a Beckett AFII85 oil burner. Does this unit have an internal stack control/cad cell in it? The guy I got it from says all he unhooked was the chimney, thermostat and oil line. I thought all oil furnaces had to have one in the chimney? Also, is it ok for the chimney pipe to go straight up and out the roof? I have the manual with it and it shows a couple pics with it coming out the furnace then running horizontal for a few feet before going out the roof. It does not say anywhere that it has to run this way? Thanks for any help.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks