Kohler Whirlpool tub controller

[cowboysunshine9]

I have an older kohler whirlpool jacuzzi tub that will only run if you turn the breaker on and off at the breaker panel. It has a control mounted on the wall that is a Model 60350 timer. Would this be bad causing the tub to run all the time unless the breaker is flipped on or off? If it is the cause I can't find a new one so is there an option to change the timer over to a newer style? The tub itself is a Kohler K-792-HJ-45. I can't see the pump or motor to tell what they are. Thank you for your help

 

[Tuttles Revenge]

Have you tried contacting Kohler directly? I work on toto neorest and usually when electronic components fail, they need to be replaced by factory parts.

 

[Sponsor]

 

[cowboysunshine9]

Have you tried contacting Kohler directly? I work on toto neorest and usually when electronic components fail, they need to be replaced by factory parts.

The part is obsolete unfortunately and I have no idea what to convert it over too. As in a new style.

 

[Tuttles Revenge]

OK.. So what I've learned from solving Geocaching puzzles.. google is your friend. We may have found a solution.

Kohler Whirlpool Timer Repair Estimate Service. # 9680, 9681, 60250. 60350 | eBay

After we receive the defective item it will be evaluated for potential repair.

www.ebay.com