superslow
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 1
Hoping to get help with my softener settings. There are four of us on city water with hardness between 13-20 on the cities water report. I measured it at 16 this morning. I got it all hooked up and ran through a regen cycle. I checked during the brine fill cycle and the salt tank was almost full of water. Think I may have a setting wrong.
The system is a Fleck 7000 sxt 64k. The BLFC is .250GPM , The DLFC is 2.0GPM and the injector is a red #0. The brine tank is about 18x40 and it almost filled with water on the brine fill cycle.
Do I need to drain some of the water in the brine tank before the next regen? Thanks for the help.
The system is a Fleck 7000 sxt 64k. The BLFC is .250GPM , The DLFC is 2.0GPM and the injector is a red #0. The brine tank is about 18x40 and it almost filled with water on the brine fill cycle.
Do I need to drain some of the water in the brine tank before the next regen? Thanks for the help.