Help interpret water test results

Discussion in 'Pumps and Tanks Well Forum & Blog' started by biel, Mar 13, 2012.

  1. biel

    biel New Member

    Feb 13, 2012
    Can someone please help me understand my water test results and recommend a treatment for high iron/manganese?
    Here are the results I got:

    Total Coliform ABSENT
    E. coli ABSENT
    Nitrate Nitrogen <1.0
    Nitrite Nitrogen <0.01
    Arsenic 0.002
    Iron *1.44 *UNACCEPTABLE
    Manganese *0.181*UNACCEPTABLE
    Hardness (CaCO3) 68
    Sodium 6.2
    Chloride <6
    pH 7.22
    Fluoride <0.20
    Conductivity 180
    Alkalinity 62
    Lead <0.002
    Copper <0.010
    Radon 250

    I just had my well deepened from 300' to 560' and these are the results I got. I tested the well 2 years ago and had high radon levels (13,000). This time it came back low. Does that seem reasonable?
    Thanks for your advice!
Similar Threads: Help interpret
Forum Title Date
Pumps and Tanks Well Forum & Blog HELP! Please help interpret well report... Jun 4, 2014
Pumps and Tanks Well Forum & Blog Help! Submersible well pump runs but won't build pressure over 30 psi! Nov 13, 2015
Pumps and Tanks Well Forum & Blog I need help to supply two houses from one well Nov 6, 2015
Pumps and Tanks Well Forum & Blog Please Help! Need to remove submersible well pump Nov 2, 2015
Pumps and Tanks Well Forum & Blog Artesian 4 " well failing attempting repair NEED HELP Oct 13, 2015

Share This Page