Grohe Atrio shower faucet install

Discussion in 'Shower & Bathtub Forum & Blog' started by BlueCanyon, Dec 21, 2004.

  1. BlueCanyon

    BlueCanyon New Member

    Dec 21, 2004
    Hi everyone.

    We have a question that we're hoping someone can help with. We are installing the Grohe Atrio 19 167, which is a dual handle shower faucet; the top handle is water control and the bottom handle is temperature.

    The installation instructions say to remove the ceramic headpart that comes installed on the rough valve (for the water control) and replace with the ceramic headpart in the box. We think that the one that came installed says 70 degrees (hard to read through the wall). The one in the box says 90 degrees.

    We don't have any problem following instructions, but we just want to understand why we're doing this in the first place.

    Thanks for any insight - Mary Ann and Dave
Similar Threads: Grohe Atrio
Forum Title Date
Shower & Bathtub Forum & Blog Older Grohe shower fauct cap removal Thursday at 2:44 PM
Shower & Bathtub Forum & Blog Need help with Toto vs Hansgrohe Shower fixtures Oct 6, 2015
Shower & Bathtub Forum & Blog Can anyone identify this Grohe roman faucet and spout? It was installed in 1990. Apr 30, 2015
Shower & Bathtub Forum & Blog Adjusting Max Temp on Grohe 35015 PBV Apr 27, 2015
Shower & Bathtub Forum & Blog Very Old Grohe Hand-Held Shower Mount/Wall Union Mar 1, 2015

Share This Page