Well actually here's the deal. I remodeled our bathrooms last year. The old 1954 mudset tile floors were removed. After having removed all of the tile and mud bed my contractor laid down the Durock and then installed the tile. The problem is the floor slopes 5/16" across the 12" base of the toilet. This is very noticeable while sitting on the toilet. I want to level it out.
My question is: if I back off the nut that holds the low side of the toilet to the floor and raise that side of the toilet 5/16" will I maintain the seal of the wax ring?
My question is: if I back off the nut that holds the low side of the toilet to the floor and raise that side of the toilet 5/16" will I maintain the seal of the wax ring?