Flexcon Challenger tank moved slightly

Discussion in 'Pumps and Tanks Well Forum & Blog' started by Flawell, Jul 5, 2012.

  1. Flawell

    Flawell New Member

    Messages:
    2
    Location:
    Northeast Florida
    I just had a new Flexcon tank installed on my well. Today, the carpenter building a little house around the tank and softener, moved the tank about a quarter of an inch to the right. He did it before I could say anything. Am I going to have a leak or any other problem with it? Should it be moved back? He was trying to keep it from touching one of the wall studs.

    Probably nothing but I just want to be sure there's no issue.

    Thanks.
  2. wondering

    wondering New Member

    Messages:
    105
    I wouldn't think that would hurt anything. If you were going to have a leak from moving it, I would think it would have started right then.
Similar Threads: Flexcon Challenger
Forum Title Date
Pumps and Tanks Well Forum & Blog Correct placement of Flexcon Flow-Thru FT-18 pressure tank help. Jul 4, 2012
Pumps and Tanks Well Forum & Blog flexcon tanks Jul 14, 2009
Pumps and Tanks Well Forum & Blog Where to buy Flexcon Aug 7, 2007
Pumps and Tanks Well Forum & Blog Challenger PC266R pressure tank May 23, 2013

Share This Page