Hi everyone,
I'm having a problem with my Broan Electric furnace lately. Sometimes the blower motor doesn't want to switch on.
Sometimes it works fine for a while but this morning it didn't want to turn on. The heating elements are working
because I can feel the heat from the furnace but the motor does not. I tested the bottom sequencer but afaik
it is good. There is no electronic control board in there. It's all mecanic. Could it be one of the relays that's going
faulty ? If so would it be the 24V relay or the 240V relay ? Right now I've been able to have it run because I left
the breaker of the furnace off half an hour to test the sequencer. I know the motor is working because I can switch
it on on the furnace on both low(normal) and high speed. Any help would be appreciated.
Thanks.
I'm having a problem with my Broan Electric furnace lately. Sometimes the blower motor doesn't want to switch on.
Sometimes it works fine for a while but this morning it didn't want to turn on. The heating elements are working
because I can feel the heat from the furnace but the motor does not. I tested the bottom sequencer but afaik
it is good. There is no electronic control board in there. It's all mecanic. Could it be one of the relays that's going
faulty ? If so would it be the 24V relay or the 240V relay ? Right now I've been able to have it run because I left
the breaker of the furnace off half an hour to test the sequencer. I know the motor is working because I can switch
it on on the furnace on both low(normal) and high speed. Any help would be appreciated.
Thanks.