Bartman79
New Member
Just bought a house that I 'think' needs a replacement cart in the shower... slow leak I played hero with and turned into an "I can't shut the hot water off ever" situation. I replaced all the O-rings, lubed appropriately, put back together and it, well, isn't good!!! It holds the cold ok, but once I open the water heater valve... ugly....
No idea what the model number of the system is (jetted shower... I got nuthin) and can't find anything on the web but frustration!!! Tried the Brizo site and got nada...
The casting on the valve body, manifold or whatever y'all call it (airplane guy here... I'm a dope when it comes to this stuff) says it was made in May 2000...
Cartridge has two numbers, other than the ASSE 1016 mark:
078020E10490R01 and hg94282
Losing my mind on this thing... any help much appreciated!!! Will try and attach a couple of pics if I can figure that piece out!
Much thanks again!!!
No idea what the model number of the system is (jetted shower... I got nuthin) and can't find anything on the web but frustration!!! Tried the Brizo site and got nada...
The casting on the valve body, manifold or whatever y'all call it (airplane guy here... I'm a dope when it comes to this stuff) says it was made in May 2000...
Cartridge has two numbers, other than the ASSE 1016 mark:
078020E10490R01 and hg94282
Losing my mind on this thing... any help much appreciated!!! Will try and attach a couple of pics if I can figure that piece out!
Much thanks again!!!