Delta 1500 to 1700 sleeve too short

Users who are viewing this thread

Cgamundson

New Member
Messages
2
Reaction score
0
Points
0
Location
Virginia
Hi Folks,
I'm new to this board, but have been reading the posts for a while now.

I just completed a Delta Monitor 1500 to 1700 conversion.
The conversion worked great, but there is one issue; the RP50880 sleeve is too short and does not fit securely into the cover plate.
I'm worried if I leave it like this water will get in behind my shower fixture and eventually cause me some issues.

Is there a sleeve that I can get that is longer then the RP50880?
If not, is there a different cover plate (Escutcheon) that I can get that will come out a little farther.
I don't need much length, a half inch or so.

Thanks,
Carl
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks