City Sewer Access

Discussion in 'Plumbing Forum, Professional & DIY Advice, Tips & ' started by ollenbam, May 7, 2013.

  1. ollenbam

    ollenbam New Member

    Messages:
    1
    Location:
    Calgary
    Hello,

    We have to create an access for the city to enter the sewer lines through our house. The current access cap is seized on the pipe, so we have to create a new hole and then place a plastic cover on the newly created hole. Currently we are drilling holes through the steel but the process is timely. I was hoping to find other suggestions.

    Thanks

    Attached Files:

  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,653
    Location:
    Cave Creek, Arizona
    Call a "good' plumber and he will have that piece out and a new one installed in about a half hour.
  3. Gary Swart

    Gary Swart In the Trades

    Messages:
    7,350
    Location:
    Yakima WA
    There are just some jobs that are not DIY friendly and are best left to the pros.
Similar Threads: City Sewer
Forum Title Date
Plumbing Forum, Professional & DIY Advice, Tips & Sewer / Water Line Insurance Sponsered by the City Jan 29, 2013
Plumbing Forum, Professional & DIY Advice, Tips & Sewage Check valve - combating the city's sewer system Aug 28, 2011
Plumbing Forum, Professional & DIY Advice, Tips & pipe from house to street in city sewer Mar 14, 2011
Plumbing Forum, Professional & DIY Advice, Tips & Connecting to City Sewer Main Jun 30, 2008
Plumbing Forum, Professional & DIY Advice, Tips & Sewer/Sulfur Smell From Isolated Shower - City Water May 12, 2008

Share This Page