bathroom sink..install oval into round???

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by a12548, Aug 13, 2006.

  1. a12548

    a12548 New Member

    Messages:
    21
    Location:
    Florida
    i removed our old 19 inch round, which has 18inch opening. We noticed theres no fancy styles for 19 rounds, all the ovals have the shell design that we like, however the oval we measured doesnt cover the front to back depth of old cutout. Are there any standard ovals that will cover that depth, and id just cut a wider width? thanks
  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    27,021
    Location:
    Cave Creek, Arizona
    lav

    Kohler has a Spiria which is 18 7/8" deep. Whether its curve would cover the entire cutout, however, would only be obvious if you had the template to put over your 18" round opening. Kohler also has several fancy rectangular shaped sinks that would work.
  3. a12548

    a12548 New Member

    Messages:
    21
    Location:
    Florida
    lav...

    the spiria im looking up says 18 3/8, not 18 7/8, is that still enough lip for 18 inch cutout?
Similar Threads: bathroom sinkinstall
Forum Title Date
Plumbing Forum, Professional & DIY Advice Bathroom remodel DWV questions Nov 14, 2014
Plumbing Forum, Professional & DIY Advice Adding garage utility sink - use existing 1st floor bathroom drain and vent? Nov 13, 2014
Plumbing Forum, Professional & DIY Advice Bathroom sink woes Nov 10, 2014
Plumbing Forum, Professional & DIY Advice Check my bathroom layout Nov 8, 2014
Plumbing Forum, Professional & DIY Advice Where to Vent New Bathrooms Nov 5, 2014

Share This Page