Aquia push rods

Discussion in 'Toilet Forum discussions' started by emcp, Aug 25, 2008.

  1. emcp

    emcp New Member

    Messages:
    2
    Location:
    Austin TX
    [​IMG]

    After installing the first Aquia we were very happy with the performance. We installed two more. One of the two has a problem generating a full flush. I looked at the water level, fill valve, and flush cartridge all were in fine working order and flushed fine with out the lid. I then switched the lid of one of the toilets that worked fine. this test determined that the problem be with the lid or the distance of the valve mechinism. I measured the push rods and they are the same. Q: Do I order new push rods and cut them longer or is there an adjustment for the valve mechinism? TIA Terry - Ed
    Last edited by a moderator: Sep 10, 2009
  2. Peanut9199

    Peanut9199 Customer Service Manager Plumbing Wholesale

    Messages:
    875
    Location:
    Ontario, Canada
    There is no adjustment on the push button or flush valve.
    If the rods are too short it would affect the flush you can call Toto and they will send you new rods they are about four inches long so you need to trim to size.
  3. emcp

    emcp New Member

    Messages:
    2
    Location:
    Austin TX
    thanks got them on order
  4. bighornram

    bighornram New Member

    Messages:
    19
    Location:
    New Mexico
    Had the same problem on a brand new Aquia II. Put in 2 quarters as this post recommends and it fixed the problem. I'll call toto and have new rods ordered but the quarter fixed the problem for me!


    http://www.terrylove.com/forums/showthread.php?t=26814
  5. bighornram

    bighornram New Member

    Messages:
    19
    Location:
    New Mexico
    Day 3 of my new Aquia II dual flush I had to go "fishing" for one of the quarters I placed on the buttons. The quarter technique works great to temporarily lengthen the push rods but if you do this it is a good idea to "stick" the quarter to the button somehow. :rolleyes:

    As I expected Toto was happy to send me replacement rods.:cool:
Similar Threads: Aquia push
Forum Title Date
Toilet Forum discussions Toto Aquia push button flush Nov 15, 2006
Toilet Forum discussions Gurgling after flushing a Toto Aquia Wall-Hung? What's wrong? Jun 28, 2014
Toilet Forum discussions Toto Aquia II installation roadblock May 26, 2014
Toilet Forum discussions Toto Aquia Mounting Flange Apr 6, 2014
Toilet Forum discussions Aquia One Piece Toilet - buttons are sinking! Mar 15, 2014

Share This Page