TonyBagadonutz
Electrician
Here's the final product, Take #1:
The first thing to hit the editing room floor will probably be that 2x2x2 tee (off the 4x4x2 tee) heading to the pedistal sink vent.
From looking at many DWV drawings, I am off the opinion that that 2" heading down will not have the volume for the 1st flr. venting which includes the toilet, sink and shower...I think I should have a 4x4x3 to a 3x2x3...the 3" will head down and split to 2 2" vents: one for toilet; one for sink/shower.
This is just my own opinion...and may be incorrect...hopefully, you good people will correct me.
Other than that, I think I might have finally won this battle.
Here's some pictures for commentary:
The text came out kind of distorted for some reason...
- the stub up is the vent and will tie back into the main stack at 96" AFF using a 1/4 bend and a 4x4x2 tee.
- the "dead man" will be for the shower/tub waste line.
...and that's that.
What say you? Glue or back in the hole?
Hopefully I have finally gotten this thing right. One thing is for sure, I would not have gotten this close to being "right" without your time and help.
The first thing to hit the editing room floor will probably be that 2x2x2 tee (off the 4x4x2 tee) heading to the pedistal sink vent.
From looking at many DWV drawings, I am off the opinion that that 2" heading down will not have the volume for the 1st flr. venting which includes the toilet, sink and shower...I think I should have a 4x4x3 to a 3x2x3...the 3" will head down and split to 2 2" vents: one for toilet; one for sink/shower.
This is just my own opinion...and may be incorrect...hopefully, you good people will correct me.
Other than that, I think I might have finally won this battle.
Here's some pictures for commentary:
The text came out kind of distorted for some reason...
- the stub up is the vent and will tie back into the main stack at 96" AFF using a 1/4 bend and a 4x4x2 tee.
- the "dead man" will be for the shower/tub waste line.
...and that's that.
What say you? Glue or back in the hole?
Hopefully I have finally gotten this thing right. One thing is for sure, I would not have gotten this close to being "right" without your time and help.
Thanks to all who have offered commentary.