ugabulldog
Member
I have an old 6" drilled well on property I am trying to tie into house. It is about 400' deep with a 1 h.p. pump set at 240'. I have ran well a few times in the past six months and water has been clear. A little over a week ago I shocked well with 2 gal. of clorox. Then last Sat, I ran water out but ran pump dry pumping about 20 gal per min for 20 mins and water was dirty before running dry. Since then I have run water 4 times, including today for about ten min at about 10 gal per min (so about 100 gal x 4 times in a week) Water is still not dirty and tastes/smells dirty....I am confused on if I should continue to run, not run, call well man, etc???? any advice is appreciated
Last edited: