Search results

Thanks!!..another thumbs up for the Toto Drake..the reviews are glowing also..sounds like I'm going to be a proud and confident "Drake" man ..you really have to live with a disfunctional toilet to feel this way..people will ask. " why is he so happy and upbeat?".."he just switched to a "Toto""...

Ok..I've pretty much decided to yank out that %$#@& Champion toilet..I like the height and elongated bowl....can anyone recommend one in that price range? Terry recommended a "Toto Drake" I believe it was.. months back, but I (thought) I would be ok with the Champion I had bought because it did...

I asked about this in a reply to the "worst toilet" thread..but thought i'd post this as new...I installed the AS Champion with the (apparently new-improved flush valve seal)..but sometimes get that cycle of re-filling because when the flush tower lands..that thin flat rubber seal can be out of...

AS Champion I heard all the horror stories about the Champion..I bought one of the later improved models with the new flush valve seal..the tank/bowl connection went fine (a long careful tightening process)..no external leak there..but guess what?..sometimes the flush valve does'nt always seal...

Looks like you're correct with that jimbo.,It doesn't seem like any adjustments are possible with that automatic tower....oh well, it does a good job flushing as it is..good thing the tank holds more than 1.6 gallons to increase the flush pressure...and 1.6 gallons does make it fill back up...

Just installed the Champion, no leaks yet, it does have the newer flush valve..Is there anyway to adjust for a longer duration flush so that it empties more of the tank?..Just doing test flushes at this point.,The flush is very brief..I'd like to see a longer duration of rushing water to be sure...

Well neighbor, I must have been on crack to allow the bargin price of the tub to put me in a position of doing these radical modifications...Don

The use of a RotoZip with a small metal cutting wheel would give you the surgical precision to do this task even next to the human spine...but then..if you sent a picture , we may all know more about your situation..ain't that right fellas..Don

Sorry I don't have a pic..It's just a tub surrounded by three walls..sitting on a 2x6 deck wall...just trying to get the ok for my plan to eliminate water going under the tub and flowing around the surround deck on the floor..It's frustrating that no one can visualize that...I must have a very...

hmmm..sounds like what you're saying is when the toilet is flushed..the downward rush of waste water in (free fall) as it leaves the toilet can splash against the funnel...and when water hits something, it's always going to be testing even the smallest gaps out to the side....Like a drop of...

Really?...I want this to be trouble free for years..this Kant-Leak ring I have has that urethane sleeve(funnel thing)..do you find that it restricts waste flow? because it does appear to reduce the diameter of the opening..perhaps too much maybe?....have you found urethane sleeve type rings to...

I see what you did and understand..I must be failing to express myself clearly..again,I know I could have installed the tub differently to begin with or even bought another type of tub all together....but as it is , I have already installed the tub in a three wall alcove...open on one...

Thanks Mark..I'll check out your pics after the Tarheels win tonight...I really miss titled my original post...I'm not worried about the cracks..I'm really not..it's the flimsy flex that bothers me..flex that can and certainly will open the caulk seal around the top lip of the tub...and the idea...

Man!! that's far more industrial looking than the waxless i was looking at...I like it!!..could you tease us with some titanium toilet flange pics?...Don

Thanks!!!..I really felt that good old wax was the way to go...I bought a Gunk (Kant Leak) wax ring with the poly insert funnel thing in it..Don

I took one out of the box at Home Depot...had two thin rubber sealing fins and an in-set seal for the bottom of the toilet..it felt like it would fit very well as i test fit it into PVC..didn't put it all the way in..didn't think id get it out easily...seems like a very clean alternative..Any...

As for the cracks..there are two on the top corners and one in the middle...all on the verticle lip edge...it was a Lowe's display model and got moved around alot apparently..sorry I don't have a pic...The install instructions say..DO NOT support tub on the rim...only support on the bottom..and...

I've always heard horror stories about inspectors..oh man!! you don't won't to build in this or that County..I've dealt with some (so called) tough ones..I've found that upon meeting these people..if I express my tendancy to over build and ask their opion about a certain phase of the work I'm...

Yes..as it is now..I set the (drop in) tub in sand mix...in a three wall alcove...on a 2 x 6 inch deck...just one side open...it's all plummed...all the framing and deck is covered with 1/2 inch thick HardiBacker...the shims were used to allow room for tile to be installed on top of the deck and...

K-1257 Mariposaâ„¢ 6' Bath Whirlpool I bought and installed a 6ft Kohler Mariposa whirlpool drop in tub..display model..got it cheap..I haven't installed tile yet on the 2 X 6 decking or the 3 wall surround....I'm a shower person...Is using one of these as a shower going to be a water...