Search results

  1. HawaiiBob

    Double Fixt Tee in place of 45 Double Wye & 1/8 bend?

    Thanks for the fast response - yes, it's installed vertically
  2. HawaiiBob

    Double Fixt Tee in place of 45 Double Wye & 1/8 bend?

    Can a 3" double fixture tee be used in place of a 3" 45 drain double wye and 1/8th bend? The bottom of the barrel sweeps into the cesspool drain line. On top is the toilet san-tee and above the vent stack. One side is the drain for the shower (with vent immediately downstream of intersecting...
  3. HawaiiBob

    Help! Where to install pump pressure switch?

    Thanks so much for your fast response. The flow rate was calculated at 10-12 GPM for a Grundfos CRI 1-9. You've brought me full circle - if the setting s/b 40 + the 9 psi loss (6.6 frict/2.6 rise) from the pump to the tank/switch, that one thing, but if it also should include the 24 psi loss...
  4. HawaiiBob

    Help! Where to install pump pressure switch?

    Aloha & help! We are off municipal water, and I want to use the garage as a rainwater catchment system to feed the house water supply. Thats very typical here in Hawaii, except that the garage water tank & pump is 200 feet from and 6' below the house entrance, where the 85 gal pressure tank is...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks