C@TCH
Member
I went to check my salt level other day and noticed water in water softener. Level of water is above salt, never seen this before. Is there something wrong, or nothing to worry about.
Last edited:
I have never seen water in my salt before.Salt gets consumed. The salt level goes down each regeneration. That is normal.
If there is something surprising, such as the water level higher than the salt level used to be?
Cool. I had to think about that one. It initially seemed counter-intuitive.Float filled softeners are not highly accurate and if the salt level drops below water level, this can cause excessive salt usage.
I went to check my salt level other day and noticed water in water softener. Level of water is above salt, never seen this before. Is there something wrong, or nothing to worry about.
What are the rotors,what should I be looking at.That's an old EcoWater 3000 model. The rotors have a habit of cracking. The venturi needs to be looked at as possible cause for brine tank filling. This is a fill first unit. Only about 2" of water should be in the tank.
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.