Recent content by Tacman7

There's something else I was wondering about if you could lend me your expertise: The pipe used to come out of the tank, go down into the ground about 12" then go over 24" then up to the pump. Since this is a temporary setup until I get the new tank, I just went straight across to the pump...

I should splain. This is a deal I setup back when we first got city water, the well is on one side and the city is on the other with valves on each side, so everything can run off the well, or everything can run off the city, but normal operations is for the houses to have city water and the...

Thanks guys Pressure tank is good I think, takes about 5 min for water to stop running/depressurize after I cut off supply. That switch is what I'm looking at next, going to try the old one and pick up a new one which can be a spare if the switch is good. The new store in town is Tractor...

Hi, New to the forum and in need of some advice. We have a submersible pump that fills a 1000 gal galv tank, then a booster pump and one pressure tank. My booster pump went out and I replaced the 1hp pump with a 1.5hp pump (because of impending upgrade) but forgot about a check valve. So I...