Yesterday, I finally installed my Fleck 5600sxt bought last year.
I have tested hardness after installation and it was zero. Everything was just fine.
This morning, after regeneration, I found that water have very salty taste.
Guess, I didn't adjust something correctly.
I would like to please someone who knows to help me to solve this problem.
I've noticed yesterday after programming that amount of water to countdown til next regeneration is about 2600 gallons. Didn't expect device will start regeneration during the night, but somehow it happens.
We are 5 members family and water hardness is always 20gpg constantly.
Settings are:
DF = Gal ;
VT = dF1b ;
CT = Fd ;
NT = 1 ;
C = 64 ;
H = 22 ;
RS = rc ;
RC = 300 ;
DO = 14 ;
RT = 3:00 ;
BW = 5 ;
Bd = 60 ;
RR = 5 ;
BF = 9 ;
FM = p0.7 ;
Thank you in advance for help.
I have tested hardness after installation and it was zero. Everything was just fine.
This morning, after regeneration, I found that water have very salty taste.
Guess, I didn't adjust something correctly.
I would like to please someone who knows to help me to solve this problem.
I've noticed yesterday after programming that amount of water to countdown til next regeneration is about 2600 gallons. Didn't expect device will start regeneration during the night, but somehow it happens.
We are 5 members family and water hardness is always 20gpg constantly.
Settings are:
DF = Gal ;
VT = dF1b ;
CT = Fd ;
NT = 1 ;
C = 64 ;
H = 22 ;
RS = rc ;
RC = 300 ;
DO = 14 ;
RT = 3:00 ;
BW = 5 ;
Bd = 60 ;
RR = 5 ;
BF = 9 ;
FM = p0.7 ;
Thank you in advance for help.