LUSCENCE Specifications

TYPE
CW-W130(ROUND)
CW-W131(ELONGATED)
Water Supply Method Direct connection to tap water
Tap Water Pressure Range 8.5 to 106.7 psi (0.06 to 0.74 MPa, 0.6 to 7.5 kgf/cm²)
Maximum Rating 120 V AC, 311W, 60Hz
Dimensions Width 15.4 x Depth 18.5 x Height 7.6 in.
(Width 390 x Depth 470 x Height 192 mm)
Width 15.4 x Depth 20.9 x Height 7.6 in.
(Width 390 x Depth 530 x Height 192 mm)
Weight Approx. 11.3 lb. (5kg)
POSTERIOR
BIDET
CLEANING
Warm Water Tank Capacity 0.95 qt. (0.9 L)
Nozzle Holes(Diameter) Auto slide type, exclusively for posterior and bidet
Posterior Cleaning Spray
Volume
0 to 0.1qt./min. (0 to 1.0 L/min.)
Bidet Cleaning Spray
Volume
0 to 0.1qt./min. (0 to 1.0 L/min.)
Warm Water Heater Capacity 250 W
Warm Water Tank Internal Control Temperature OFF: water temp., LOW: approx. 93°F(34°C),
MID: approx. 97°F(36°C), HIGH: approx. 100°F(38°C)
Safety Devices Thermal fuse, high-temperature sensor switch, float switch to prevent empty tank operation, overturn sensor switch
DRYER Air Volume 35.31 ft.³/min. (0.3m³/min.)
Warm Air Heater Capacity 0, 150, 300 W
Warm Air Temperature Adjustments LOW: room temp., MEDIUM, HIGH
Safety Device Thermal Fuse
TOILET
SEAT
Heater Capacity 42 W 45 W
Surface Temperature OFF: room temp., LOW: approx. 87°F(30.5°C),
MID: approx. 93°F(34°C), HIGH: approx. 99°F(37°C)
Temperature Adjustments Four steps selectable (microcomputer controlled)
Safety Device Thermal fuse
Power Cord Effective length: 3.9 ft. (1.2 m)
Other Functions: -Occupied seat sensor
-Power button
-Toilet seat and toilet seat lid Slow Down
-Nozzle self-cleaning button
-Toilet seat heater auto shut-off

Simple,Straightforward Installation

1. Install the junction valve to the water supply.
2. Install the seat body.
3. Connect the water supply.
4. Install the remote unit.

The Luxury Lavage LUSCENCE is designed to fit standard U.S. toilet dimensions, both round and elongated. And it is designed to fit better because the water tank is mounted behind the seat, not on the side like other models sold in the U.S. Installation is in four simple and straightforward steps.


 
  For further details, please contact us.

 
 

Copyright (C) 2002 INAX Corporation. All rights reserved.