Who would I call to rethread the 2" galvanized well head of well casing?

[Paul Morgan]

It is in bad shape and the pvc well head I took off it will not go back on. Or should I just take a 2" galvanized fitting and thread it on the well head....thus redrawing the threads? Advice please. Thanks.

 

[Boycedrilling]

Most pump installers will have a ridgid hand threader with heads up to two inches. You should also be able to rent a 2” threader from just about any rental place

 

[Sponsor]

 

[Banjo Bud]

If they’re not too bad you can use a fitting. Turn it till you can’t turn it anymore, then hit it on top with a hammer. Repeat.

 

[Paul Morgan]

Got it done. Thanks.