Which PEX brands for Thermofin-C plates - Dupe from HVAC forum

Users who are viewing this thread

tomluoma

New Member
Messages
6
Reaction score
0
Points
0
Location
Montana
We are putting in our first underfloor hydronics system.
We want to use Radiant Engng Thermofin-C heat plates on 8 inch centers.

They recommend ViegaPEX Barrier (PEX-c) because they say PEX-c is gripped by the track better -- but it has a 9.5 min C/L bend radius. We find this troubling.

They have had noise problems with PEX-a from a company we don't know -- Mr Pex.

They don't sell Wirsbo hePEX (PEX-a) due to a Wirsbo selling a competing heat plate.

So the questions are --
Does anyone have experience with these plates and with whose PEX and type?

What about this bend radius issue?

Who is making good barrier PEX now?

Is there a overall recommendation?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks