Which Franklin motor for use with Grundfos 10S15-21?

[semipro]

Hi all, my first post.

I plan to replace my current failing pump/motor with a Gundfos 10s15-21 and Franklin motor. I am unsure exactly which Franklin motor to purchase. Based on their literature its looks like one of the highlighted units below will work but I’m confused by the differences between them and am having a hard time finding that info at Franklin.

Would a 224 300 9203S work? Is there a better choice? I don’t fully understand the significance of the digits after the “224 300”. The “92” seems to indicate “lead in motor” but I don’t understand what that means. I also don’t know what the “03” indicates. I assume the rotation direction and mounting stud spacing is standard.

Other than whatever lead works with the motor chosen and splice kit, and control box is anything else required for installation?

Thanks in advance.

 

[Reach4]

The “92” seems to indicate “lead in motor” but I don’t understand what that means. I also don’t know what the “03” indicates.

Looking at http://franklinwater.com/media/114490/M1479_MDC_Catalog_01-14_WEB.pdf, I would guess that means that the wires (leads) that will go up past the wet end and the connector are included.

 

[Sponsor]

 

[semipro]

Thanks for the response @Reach4