Well pump pressure switch wiring

[Chasity]

I have a white wire neutral black hot where do they go on pressure switch?
I replaced the switch and pump hooked wires still no voltage on the ground coming out of breaker box

 

[Reach4]

Usually, the neutral white wire is not switched.

The neutral and ground are connected together in your main breaker box.

 

[Sponsor]

 

[Chasity]

Usually, the neutral white wire is not switched.

The neutral and ground are connected together in your main breaker box.

Confirmed all that

 

[Chasity]

Confirmed all that

Where do they go on pressure switch

 

[Reach4]

Where do they go on pressure switch

They? The hot from the breaker panel and the hot to the pump? Usually people put the hot from the box on one outside terminal, and the hot to the pump next to it.

It is also possible to use both sides of the pressure switch by wiring in parallel. Most people don't bother.

https://terrylove.com/forums/index.php?threads/wiring-pressure-switch-for-120-volt-pump.53776/

 

[WorthFlorida]

Is your pump 120v or 220v? This video shows how it is done for a 220v motor. The the white wire(L2) in this video is a hot wire, not a neutral. The black wire is hot (L1). With other electrical mistakes shown in this video, the WHT wire must be marked, usually with BLK tape to ID it as a hot wire.