So, I just recd my water report:
Chloride. 7.9mg/L
Sulfate 20.4 mg/L
Fluoride <0.1 mg/L
Nitrite <0.1 mg/L
Nitrate 7.1 mg/L
Iron < 0.1 mg/L
Hardness 26.4 mg/L
Sodium 8.5 mg/L
Alkalinity 6.24 mg/L
pH 5.7
Here is the setup I currently have.
Culligan Model 89 with brine tank. Close to 26 yrs old and not working correctly as salt levels never seem to decrease. No salt bridge, just don't think it's functioning correctly.
And a Neutralizer tank w/ a Fleck 7000 (I think). About 6 yrs old. Just refilled with Calcite last week. But, not sure of what to set the controls on based on these numbers.
Info on house:
Just my wife and I.
3 full bath
Shallow well
Septic system (old school...27 yrs old)
PM sent to Dittohead.
Chloride. 7.9mg/L
Sulfate 20.4 mg/L
Fluoride <0.1 mg/L
Nitrite <0.1 mg/L
Nitrate 7.1 mg/L
Iron < 0.1 mg/L
Hardness 26.4 mg/L
Sodium 8.5 mg/L
Alkalinity 6.24 mg/L
pH 5.7
Here is the setup I currently have.
Culligan Model 89 with brine tank. Close to 26 yrs old and not working correctly as salt levels never seem to decrease. No salt bridge, just don't think it's functioning correctly.
And a Neutralizer tank w/ a Fleck 7000 (I think). About 6 yrs old. Just refilled with Calcite last week. But, not sure of what to set the controls on based on these numbers.
Info on house:
Just my wife and I.
3 full bath
Shallow well
Septic system (old school...27 yrs old)
PM sent to Dittohead.