Verify my Fleck 5810sxt settings

[Thetruck454]

I pieced my settings together from reading on here. Anything seam off?
Water was tested to 9gpg
.25gpm .75lb/min
Injector 1
drain flow 2.4gpm
1.5cuft resin in 10x54 tank
15x17x36 brine tank

DF:GAL
VT:5810
RF:df1b
CT:fd
C:30 (This right for 6lbs salt/cuft?)
H:10
RS:RC
RC:200
Do:28
RT:2:00
BW:10
BD:60
RR:5
BF:12
FM:t1.2
REff
VRff

 

[Reach4]

Looks good to me. You use the reserve method of specifying the reserve in gallons. You could instead choose to let the softener monitor your usage. It will get expectations of how much water you use on each day of the week rather than having a fixed 2oo etc. To choose that,
RS cr = Cr = base reserve on recent experience

I started that way but switched to your way because I got impatient.

 

[Sponsor]

 

[ditttohead]

Change RC to cr, and "Set it and forget it!". Sorry, had to go there.

 

[Thetruck454]

Change RC to cr, and "Set it and forget it!". Sorry, had to go there.

Bahaha, that's for the good laugh.